7
10
Recording mode setup
Round-the-clock recording and
Event recording.
Round-the-clock recording
is
to record the video continuously.
Event recording
is to record the
video only if a motion event is
detected.
To set the intended recording
type,
select
Options: Preferences
,
and choose the appropriate re-
cording type from
Recording
Mode
drop down in the
Prefer-
ences
dialog box.
Preferences and options settings continued
Before starting the video recording, first select appropriate devices from
De-
vices
menu. The devices above the menu separator bar are video devices and
the devices below the menu separator bar are audio devices, available on the
computer.
Then, click on the control bar or select
Command: Record
to start the recording.
To stop recording, click or select
Command: Record
again.
Access control
To password protected so
that anyone accessing
Secu Express Watcher or
connecting to Secu Ex-
press Watcher via Secu
Express Remote Viewer
to view the live video is
requested to enter the
password. The password
can be set in
Options: Preferences
dialog box.
Preferences and options settings continued
Snapshot
To take a picture of current video
frame, select
Comand: Snapshot
or click the above icon on the
Control bar.
After taking a snapshot, the
Snapshot
dialog box appears.
You can save the snapshot,
change the font settings of the
time stamp in the dialog box.
Remote access settings
SecuExpress Watcher allows you to connect from a remote site to view live video.
To allow the remote access, select
Options: Remote Access…
to open the dia-
log box. See page 12
Check
Enable Video Server
checkbox.
Specify
TCP port number
(Note: SecuExpress Remote has to have the same
TCP port number so that you can connect to this video server).
Specify
the maximum number of connections
for the number of simultaneous
connections allowed from remote computers.
To view the current remote access connections, select
View: Show Remote Con-
nections.
Notification of IP address change by e-mail
Some dial-up Inter-
net connections change IP addresses periodically, If your computer running
SecuExpress Watcher has this type of Internet connections and you would like to
watch the camera video remotely, you have to enable the option of
Notify IP
change by email
in the
Preference
dialog box by selecting
Options: Preference
Click the settings button to specify the related email settings
You will receive an email with a new IP address whenever the IP address is
changed. Take the new IP address and update it in the SecuExpress Remote
Connect
dialog box. Please refer to SecuExpress Remote section on the provided
CD for more details
