15
Setup of the PVTS3-U
Plug the 12 volt battery pack into the female power jack leading from the Y con-
nector Into the power (see diagram on page 14) Plug one of the male ends to the
power input on the PVTS3-U and the other male end to the camera being used.
This will power your transmitter and camera. The PVTS3-U will now be on.
Plug the video cable from your camera using the male to male adapter included
into the PVTS3-U. The PVTS3-U will now be transmitting a signal.
1 Insert the supplied CD into your computer & install the software “Secure Xpress
2”. Be sure to write down the Serial Number that is on the CD you will need this
for the installation. (Operational system Windows XP (sp2) or Windows Vista)
2
1
2
3
4
5
6
This will create a desk
top Icon
Frequently Asked Questions and Trouble Shooting
I do not get a picture what do I do?
Be sure that the Hidden Camera unit is plugged into a 110V power outlet.
See pairing instructions on page 14 and re “pair” the receiver with the transmitter.
My USB device is not working what can I do?
Be sure you have installed the ActiveX on the enclosed CD.
Try another USB port.
Reboot your PC, keep the USB receiver plugged in, then Open the program again.
I can not get remote monitoring to work what can I do?
Contact your ISP provider Have them help you set up your router to bypass the
fire wall. You will, if you have a fire wall set up, need to open 1 port to forward the
video so it can be viewed remotely.
See the manual on the CD it has more details on remote viewing.
How do I find my IP address?
Go to www.whatismyip.com
Why do my preferences not stay set?
Simply check the last recording and detection state in the preferences dialog box
to save the recording and detection state, see page 11
**Please note that plugging this unit into any electrical outlet other than a 110V
will cause the unit to not function and voids the warranty on this unit, Please use
correct adapters for your voltage.
