FR
EN
27
OPERATION
A
B4
TURNING THE MACHINE
To change direction, place throttle control
(4) to LOW position.
Grip the side clutch lever (8) or (9) on the
side to where you turn.
B
NOTE:
By tightening control lever (8) the machine
makes a change of direction towards the left
and if you use the control lever (9) the
change of direction is made towards the
right.
NOTE:
Choice of the speeds of progress in the
work:
1st: very heavy and very sloping works
2nd: light works
• Before putting into gear the rotation of the
flail, put the driving rate at most.
• When abnormal vibrations appears, stop
the engine and check tines.
B5
MOWING
D
Press and maintain the unbolting control lever
(24) then press on the control lever (10), after
flail clutching it is enough to maintain the
control lever (10) in low position.
C
A
Grip the coupling clutch lever (3) to start
moving.
Move the throttle control (4) to HIGH
position.
Move shift lever (2) to position 1.
B
B6
MOWING HEIGHT ADJUSTMENT
To adjust mowing height, move front tires.
• When you turn the handle (11) to the left, mowing height will be lower : min. 50 mm.
• When you turn the handle (11) to the right, mowing height will be higher : max. 100 mm.
4
8
9
These two control levers must not
be used at the same time.
4
2
The 3rd speed is to be only used for
the movements with the disconnec-
ted flail.
On a slope:
• Do not operate the machine on the slope
over 25°of inclination.
• Put spike shoes.
• In a slope avoid working by rising (risk of
capsizing) but rather by coming down.
• Make sure that there is not holes, rocks or
other obstacles.
• Move horizontally and turn on a gentle
slope.
• Do not operate on the sharp slant even
with an assistant person.
10
3
11
24
Содержание MAXIMA
Страница 34: ...34 ...
