36
37
Fixing the camera to a vented helmet
1. Fix the camera to the mount clip (i).
2. Thread the supplied straps through the slots in a flat or curved Adhesive
Mount (don’t remove the adhesive film) (ii).
3. Attach the camera assembly to the strap mount assembly by sliding it in
until it clicks into position.
4. After fixing the camera to the mount correctly, use the strap to fix it to the
helmet. Adjust the length according to the helmet’s size, and then push the
clips down into position to lock the straps in place.
i
ii
C
Fixing the camera to a board/flat surface
1. Ensure the surface is clean and dry before applying the adhesive mount.
2. Peel off adhesive paper and stick the mount in the desired position.
3. Fix the camera to the Mount Clip (i).
4. Attach the camera assembly to the Adhesive Mount (C) by sliding it in
until it “Click” into position.
i
C
(“Click”)
