20
21
[...continued]
Using the camera
4. Photo shooting
You can set the image resolution before taking photos. Press the “M” key to enter the setup interface, press the
“>” or “<” keys to move the cursor to , select the menu “Image Resolution” and press the “OK” key to enter the
resolution setup menu. There are three resolution modes available for your selection:
3M: Photo shooting resolution of 2048 x 1536
5M: Photo shooting resolution of 2592 x 1944
8M: Photo shooting resolution of 3200 x 2400
• Single shot:
In preview mode, press the “Shutter” once to shoot a photo. You will hear a “Click”, the front
green indicator will flash once (the photo shooting icon on the LCD segment screen will also
flash once) and the system will return to the preview state
• Triple Shot:
Press the “M” key to enter the camera setup interface. Press the “>”or “<” keys to move the
cursor to , press the “>” or “<” keys to select the menu “Tripple” and press the “OK” key to
confirm. Press the “M” key to exit the setup interface after setting. When the “Shutter” is
pressed once, the camera will then take three consecutive photos
• Time-lapse mode:
Press the “M” key to enter the camera setup interface, press the , key to move the cursor to
, then press the “>” or “<” keys to select the menu “Continuous Shooting” and press the “OK”
key to set the continuous shooting interval time at 2s, 3s, 5s, 10s, 20s or 30s. Press the “M”
key to exit the setup interface after setting the interval time. When the “Shutter” button is
pressed, the camera will start shooting one photo every 2s, 3s, 5s, 10s, 20s, or 30s until the
button is pressed again to stop
• Self-timer mode:
Press the “M” key to enter the camera setup interface, press the “>” or “<” keys to move the
cursor to , then press the “>” or “<” keys to select the menu “Self shot” and press the “OK”
key to set the delay time at 0s, 5s or 10s. Press the “M” key to exit the setup interface after
setting the delay time. When the “Shutter” is pressed once, the camera will then start the
timer and shoot a photo at the end of the delay time
Note:
If the memory space becomes full, the system will display the message “Out of Memory” on the TFT display
screen and return to the preview mode
5. Voice recording
Press the “M” key to enter the camera setup interface, select the menu “Capture Mode”, press the “OK” key to
enter the selection interface, press the “>” or “<” keys to select , press the “OK” key to confirm your selection,
and finally press the “M” key to exit the setup interface. Press the “Record” key to start recording and the green
indicator will flash slowly, the TFT screen will display the voice recording icon and the timer will start.
After sound recording, press the “M” button to return to the system setting interface. Select the “Capture Mode”
menu and press “OK” to enter the selection interface. Press the “>” or “<” keys to select , exit the voice mode
then press the “M” key to return to the preview interface.
Note:
When the camera is restarted or it wakes up, it will recover to video recording mode
[continued...]
