10
11
Using the Stake
This speaker can be used at the beach, picnics, BBQs, festivals, garden parties, camping and at home.
1. Pull the Stake (10) out of the Stake tube (9)
2. Turn the Stake (10) 180 degrees and push back into the Stake tube (9) – see figure 1
3. Push the assembled stake into the ground by hand force only – see figure 2
Do not
use any object or the Diggit to hit it into the ground
4. Make sure the lower rubber ring is above the ground to allow easy removal from the ground.
Do not
push the entire stake into the ground, it will make removal difficult
5. Carefully place the Diggit on to the Stake tube (9) – see figure 3
6. Once finished using the Diggit, remove the Diggit from the Stake tube (9)
7. Grab the lower end of the Stake tube (9) and exposed part of the Stake (10) and pull out of the ground.
Do not
wriggle the stake in the ground as this may damage the product
8. If the Stake tube (9) or Stake (10) has dirt on it, clean them with a damp cloth before returning the
Stake (10) into the Stake tube (9) for safe keeping
Note:
Please only push the stake into soft ground.
Figure 2
Figure 1
Figure 3
