6
7
LED lights indication
Pairing mode
Flash white quickly for new device pairing
Flash white slowly for auto reconnection to last paired device
Paired in Bluetooth
®
mode and
playing audio
Solid white
Paired in Bluetooth
®
but
not playing audio
Flashing white
Aux-in mode
Flash white 2 times every 3 seconds
TWS pairing
Flash white slowly
Enter TWS mode
Solid white for slave speaker and flashing white quickly for
master speaker
TWS paired with device but
not playing audio
Master speaker flashing and slave speaker solid white
TWS paired with device and
playing audio
Both speakers solid white
Battery below 30%
Flash red every 3 seconds
Charging battery
Solid red
Charging finish (around 95%)
Red LED off
Pairing the Diggit to your device
1. Long press Power button (3) to turn the speaker on and it will automatically enter pairing mode
2. Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices
3. Select ‘KS Diggit’. If asked for a passcode, enter ‘0000’, and the device will pair
4. Once connected an audio tone will sound and the LED indicator (5) will be a solid white if playing
audio or slowly flashing white if not playing audio
Re-pairing or pairing new devices
1. Turn Bluetooth connectivity off on any previously paired devices
OR
2. Long press the MFB (4) to re-enter pairing mode
3. Follow the ‘Pairing the Diggit to your device’ instructions
Note:
If a previously paired device is not present within the Bluetooth connectivity range then the
speaker will re-enter pairing mode.