a. Remove the ‘:MOVE’ panel and SERVO:Lite
board from the :MOVE mini.
b. Using the
LONGER
two M3 screws and
spacers provided, attach the line following
board to the underside of :MOVE mini. The
shorter screws can be discarded.
1
Reconnect the servos and slot the SERVO:Lite
assembly back into :MOVE mini. Using the
cable provided, connect the Interface Board to
the Line Follower Board. Refer
to Step 2 on the previous
page for the connection
diagram.
GET CODING!
Visit kitronik.co.uk/5659 for help. See the
online datasheet for a tuning guide.
2
3
NOTE:
Ensure the larger robot logo is visible
from below and the pins are pointing out of
the front of the :MOVE mini.
FOR USE WITH :MOVE MINI
NOTE:
This instruction book is for :MOVE mini Mk2. If you have an
original :MOVE mini, visit www.kitronik.co.uk/5659-mk1.
