1
2
On the underside of the Line Follower Board, there are
two potentiometers which can be adjusted using a small
screwdriver. These can adjust the boards sensitivity to
light depending on which direction its turned.
For use with the :MOVE mini, see the
following page.
If you wish to use this board separately,
connect the Line Follow Board to the
Interface Board in the order shown.
GND 0V
P15 R
3V3 3V
P16 L
GND 0V
BUILD INSTRUCTIONS
TUNING GUIDE
To make the detector less sensitive: turn the pot clockwise.
To make the detector more sensitive: turn the pot anti-clockwise.
-
+
NOTE:
This kit includes fixings for both the original :MOVE mini and
:MOVE mini Mk2, so there may be spare components left over after
the build.
To use the Line Following board with the
Interface board, first complete the build
instructions provided with the Interface
Board.
