KITO HARRINGTON HPC500 Series, Руководство пользователя

Страница: 21 / 32

21
 Severe service - quarterly
 Special or Infrequent Service
– as recommended by a Qualified Person
5.3 Frequent Inspection
5.3.1 Use the following as guidance for inspections to be made on a FREQUENT basis.
 Inspect all functional operating mechanisms for:
-
Proper Operation
-
Proper Adjustment
-
Unusual Sounds
 If a hoist/trolley is included in the system, perform inspection in accordance with the ma
nufacturer’s
recommendations for FREQUENT inspection.
 Continually observe during operation. Any defects or damage must be reported and shall be
evaluated and resolved by a Designated Person such that the equipment is maintained in safe
working condition.
5.4 Periodic Inspection
5.4.1 Use the following as guidance for inspections to be made on a PERIODIC basis.
 Inspect in accordance with Table 5-1.
 Results of PERIODIC inspections must be reported and shall be evaluated and resolved by a
Designated Person such that the equipment is maintained in safe working condition.
Table 5-1 Periodic Inspection
Requirements of frequent inspection.
Deformed, cracked on corroded members
Loose or missing bolts, nuts, pins or rivets.
Worn, cracked, or distorted parts such as pins, bearings, wheels, shafts, gears, rollers, locking
and clamping devices, bumpers, stops, and wheel running surfaces (rail or flange).
Function, instruction, and warning labels for legibility and replacement.
If a hoist/trolley is included in the system, perform inspection in accordance with the
manufacturer’s recommendations for
PERIODIC inspection.