4
4.
Install new 2.34 mm orifices supplied with this kit to the end
of the gas valve. Use 6 mm socket and wrench or 6 mm nut
driver to tighten.
NOTE:
The number 2.34 is stamped on the orifice for
identification.
5.
Replace burner by sliding the middle tube (venturi) over the
orifice.
6.
Reattach gas burner using 2 screws.
7.
Repeat the procedure for each grill burner.
Change the Rotisserie-infrared burner orifice(s)
1.
Remove the access cover and screw at the back of the grill
hood with a Phillips screwdriver.
2.
Use Phillips screwdriver to remove 2 screws holding the
spider guard to the burner.
3.
Use 10 mm wrench to remove the brass orifice located at the
end of the supply pipe.
4. For models with 1 rotisserie burner:
Install 1.9 mm orifice supplied with this kit to the end of the
supply pipe. Use 10 mm wrench to tighten.
For models with 2 rotisserie burners:
Install 1.55 mm orifice supplied with the kit to the end of the
supply pipe. Use 10 mm wrench to tighten.
NOTE:
The number 1.9 mm or 1.55 mm is stamped on the
orifice for identification.
5.
Repeat the procedure for each rear burner.
A. Grill burner orifice
A. Burner/orifice connection
A. Two screws
A
A
A
A. Spider guard
B. Two screws
A
B
