KitchenAid KSOX 9020, Инструкция по эксплуатации

Страница: 27 / 32

Cleaning and maintenance
27
SIDE BURNER CAPS AND GRATE
Cleaning Method:
• Clean with a brass bristle brush.
• Wash grate using mild detergent, warm water and degreaser.
• Rinse with clean water and dry with soft, lint-free cloth.
U-SHAPED BURNERS
Cleaning Method:
• Clean the exterior of the burner with a wire brush.
• Clear any clogged burner ports with a straightened paper clip.
• Do not use a toothpick as it may break off and clog
the port.
• Check and clean burner/venturi tubes.
1. Remove grill grates and sear plates.
2. Remove the 2 screws that hold the burner in place.
Remove gas burner from the grill.
A 2 screws
3. Use a flashlight to inspect inside the gas burner
through the burner inlet to ensure there is no
blockage. If any obstruction is seen, use a metal
coat hanger that has been straightened to clear
them.
4. After inspecting the inside of the gas burner for
blockage, reassemble the burner by sliding the
middle tube of the gas burner over the gas injector.
A Burner/injector connection
5. Reattach gas burner using 2 screws.
A 2 screws
DRIP TRAY
IMPORTANT: The drip tray should only be removed when the grill is completely cool.
The drip tray pans (on some models) collect grease and food particles that fall through the grill.
Clean often to avoid grease build up.
Cleaning Method:
• Remove tray and rest on a flat surface.
• Wipe excess grease with paper towels.
• Mild detergent and warm water. Rinse and dry thoroughly.
• Replace drip tray.
KNOBS AND FLANGE AREA AROUND KNOBS
IMPORTANT: To avoid damage to knobs or flange area around knobs, do not use steel wool, abrasive
cleaners, or oven cleaner.
Do not soak knobs.
A
A
B
A