KitchenAid KSOX 9020, Инструкция по эксплуатации

Страница: 13 / 32

Injector table
13
IMPORTANT: When changing the gas cylinder, it should be carried out away from any source of ignition.
Check for gas leaks
Do this immediately after the gas is connected and every time the appliance is reconnected after it has not
been used for some time.
Once the rubber pipe is connected to the gas supply, proceed as follows:
1) Open the gas valve on the LPG cylinder (or turn the ON-OFF tap for methane supply).
Conversion from LP gas to nature gas (only for some countries - see rating label)
Explosion Hazard
Use approved "outdoor" gas supply line.
Securely tighten all gas connections.
Failure to do so can result in explosion, or fire.
IMPORTANT: A chain should be fixed between the wall where the barbecue hose is connected and the
barbecue. This chain should be shorter then the hose, so the hose cannot become loose when moving the
barbecue.
This BBQ must be installed and/or used outdoor or in an amply ventilated area, it must have at least 25%
of the surface (sum of the walls surface) area open.
IMPORTANT: This installation must conform with local codes and ordinances and made by qualified
technician (Servicing Center).
A combination of pipe fittings must be used to connect the grill to the existing gas line.
WARNING
Gas categories I2E+
I3B/P(30),
I3+(28-30/37)
I3B/P(50) I2H
Model
Gas G20 G25 G30 G31 G30 G20
Pressure 20mbar 25mbar 29mbar 37mbar 50mbar 20mbar
KSOX
9020
Injector
Main grill 1.90mm 1.90mm 1.27mm 1.27mm 1.08mm 1.90mm
Back
burner
1.57mm 1.57mm 1.01mm 1.01mm 0.86mm 1.57mm
Side
burner
1.55mm 1.55mm 1.01mm 1.01mm 0.86mm 1.55mm
Heat input (Hs) 28.6 kW 28.6 kW 28.6 kW 28.6 kW 28.6 kW 28.6 kW