Meco Aussie Vantage 6623S8E641 Use Скачать руководство пользователя страница 1

Страница: 1 / 40

For Outdoor Household Use Only. Not for Commercial Use.

Need Help? Need to Register Your Grill? Looking for Aussie Parts & Accessories?

Visit us online at www.AussieGrills.com Or call Aussie Customer Service at 1-800-251-7558

• Failure to follow these intructions could result in

fire or explosion which could cause death, serious
personal injury, or property damage.

• Read and follow instructions carefully before as-

sembly or use.

• Do not use this product for any other purpose than

which it is intended.

• These instructions must be kept with the user.

SAVE THESE INSTRUCTIONS.

If you smell gas:

1. Shut off gas to the appliance.
2. Extinquish any open flame.
3. Open lid.
4. If odor continues, keep away from the appli-

ance and immediately call your gas supplier or
your fire department.

WARNING

DA N G E R

LP Gas Grill Assembly and Use Manual

6623S8E641

• Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any
other appliance.

• An LP cylinder not connected for use shall not be

stored in the vicinity of this or any other appliance.

WARNING

6623S8Y641

Содержание Aussie Vantage 6623S8E641 Use









































Результаты поиска

Содержание Aussie Vantage 6623S8E641 Use

Отзывы:

Похожие инструкции для Aussie Vantage 6623S8E641 Use

Бренды по названию

Популярные бренды

Meco Aussie Vantage 6623S8E641 Use, Руководство пользователя

Результаты поиска

Содержание Aussie Vantage 6623S8E641 Use

Отзывы:

Похожие инструкции для Aussie Vantage 6623S8E641 Use

Бренды по названию

Популярные бренды