ENGLISH
USING THE PASTA PRESS
|
9
USING THE PASTA PRESS
OPTIONAL:
If desired, attach the next
pasta plate, using the directions in the
“Attaching the Pasta Press” section.
NOTE:
Allow Stand Mixer to rest for at
least 1 hour after extruding 2 consecutive
pasta dough recipes.
IMPORTANT:
After removing the auger
from the press housing, be sure to clean
any dried dough from the auger. See
“Care and Cleaning” for details.
3
Unscrew the pasta ring to remove.
If pasta ring is too tight to remove
by hand, slip the wrench side of the
combo tool over the grooves, and
turn as shown. Once the pasta ring
is off, pop out the pasta plate.
4
Use the combo tool hook to pull
the auger from the Pasta Press
housing.
DISASSEMBLING THE PASTA PRESS
1
Turn Stand Mixer OFF and unplug.
2
Remove the Pasta Press attachment
from the Stand Mixer.
