KitchenAid KRFF507HBS, Инструкция по использованию и уходу

Страница: 20 / 130

20
Recommended Freezer Temperature
Adjust Temperature Set Points
Refrigerator set point range: 33°F to 45°F (0°C to 7°C).
Freezer set point range: -5°F to 5°F (-21°C to -15°C).
1.
Press and hold TEMPERATURE for 3 seconds to activate
Temperature mode.
2. When Temperature mode is activated, press TEMPERATURE
to select the Refrigerator zone. The display will show the
temperature set point of the selected compartment as shown.
3.
Press LOCK, under plus, to raise the set point, or press
OPTIONS, under minus, to lower the set point.
4. When you have finished adjusting the refrigerator set point,
press TEMPERATURE to change the display to show
the freezer set point. When the zone has been changed,
“FREEZER” appears on the display screen.
5.
Press LOCK, under the plus button, to raise the set point,
or press OPTIONS, under the minus button, to lower the set
point.
Save/Confirm Temperature Settings
■
When you have finished adjusting both the refrigerator and
freezer set points, press MEASURED FILL “Confirm” to save
the settings.
NOTE: To exit Temperature mode without saving changes, press
the ICE MODE button under Back at any time, or allow about
60 seconds of inactivity. The temperature mode will turn off
automatically and return to the normal screen.
When adjusting temperature set points,
use the following chart as a guide:
CONDITION: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Setting 1°
higher
REFRIGERATOR too warm REFRIGERATOR Setting 1°
lower
FREEZER too cold FREEZER Setting
1° higher
FREEZER too warm /
Too little ice
FREEZER Setting
1° lower
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is turned
off.
■
To turn cooling off, press and hold the LOCK and MEASURED
FILL buttons at the same time for 3 seconds. When cooling
is off, “Refrigeration Cooling is Off” will appear on the display
screen as shown.
IMPORTANT: To avoid unintentionally locking the dispenser
or changing other settings, be sure to press both buttons at
exactly the same time.
■
To turn cooling back on, press and hold LOCK and
MEASURED FILL for 3 seconds again. COOLING IS OFF will
disappear from the display screen.
Options
Press the OPTIONS button to open the Options menu and select
between Max Cool, Max Ice and Water Filter Status.
Press the ICE MODE button at any time to return to the normal
screen.
Max Cool
The Max Cool feature assists with periods of high refrigerator use,
full grocery loads, or temporarily warm room temperatures.
■
To turn on the Max Cool feature, press the OPTIONS button to
enter Options mode, then press the LOCK button, under Max
Cool, to activate the feature. When the feature is on, the Max
Cool icon will appear on the dispenser display screen. The
Max Cool feature will remain on for 24 hours unless manually
turned off.
■
To manually turn off the Max Cool feature, press the OPTIONS
button to enter Options mode (unless you are already in
Options mode), then press LOCK again. When the feature has
been turned off, the Max Cool icon will disappear from the
dispenser display.
NOTE: Setting the freezer to a colder temperature may make
some foods, such as ice cream, harder.
A
A. Press LOCK and MEASURED FILL at the same time.
REFRIGERATOR USE