12.
Position the tabular portion of the side trim panel behind
the door facing frame, and then firmly push the outside
edge of the trim behind the side bracket, as shown.
Exploded View of Panel Placement
A. Door facing frame
B. Tabular portion (shaded) of side trim panel
C. Side bracket
D. Side trim panel in place
A. Door facing frame
B. Trim panel
C. 1" T10 screws (black or stainless steel) (4)
Complete Installation
1.
Install the turntable in the microwave oven.
2.
Check the operation of microwave oven by placing 1 cup
(250 mL) of water on the turntable and programming cook
time of 1 minute at 100% power.
3.
If the microwave oven does not operate:
■
Check that a household fuse has not blown, or a circuit
breaker tripped. Replace the fuse or reset the curcuit
breaker. If the problem continues, call an electrician.
■
Check that the power supply cord is plugged
into a grounded 3-prong outlet.
■
See the Use and Care Guide for troubleshooting
information.
Installation is now complete.
Save these Installation Instructions for future use.
ASSISTANCE
Call your authorized dealer or service center. When you call,
you will need the microwave oven model number and serial
number. Both numbers can be found on the model and serial
number plate, which is located behind the microwave oven
door on the front frame of the microwave oven.
If you need additional assistance, call us at our toll free number
or visit our website listed in the Use and Care Guide.
W10772547A
SP PN W10775971
A B C D
A
B
C
© 2015
All rights reserved.
13.
Attach the side trim panel to the door facing frame using
two 1" T10 screws. Use the black screws for black models
and the stainless steel screws for stainless steel models.
14.
Repeat steps 12 and 13 on other side.
2/15
Printed in U.S.A.
