6
INSTALLATION INSTRUCTIONS
Install the Microwave Oven
(24" (61.0 cm) Installation Only)
NOTE:
For this microwave oven, the door handle may be used
for lifting. Do not use any other portion of the control panel,
side brackets, front frame, or trim for lifting.
1.
Empty microwave oven of any loose items.
2
. Using 2 or more people, slide the microwave oven
all the way into the opening.
3.
Center the microwave within the opening.
Open the microwave oven door.
7.
With the microwave oven near the opening, plug
the microwave oven into the grounded 3 prong outlet.
8.
Replace microwave oven in cutout opening.
9.
Open the microwave oven door. The holes in the door
facing frame should align with the holes just drilled into
the cabinet. Fasten the microwave oven door facing to the
cabinet using four 1" T10 screws. Use the black screws for
black models and the stainless steel screws for stainless
steel models.
10.
Proceed to “Complete Installation” section.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
microwave oven.
Failure to do so can result in back or other injury.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
A
B
C
4.
Mark 4 holes (2 on each side) in the door facing frame
of the microwave oven.
5.
To avoid damage to the frame while drilling during the next
step, close the door and remove the microwave oven.
6.
Drill the 4 holes using 5/64" (2 mm) drill.
A. Microwave oven door facing frame
B. Cabinet
C. 1" T10 screws (black or stainless steel) (4)
