KitchenAid KHID4 65510, Инструкция по эксплуатации

Страница: 15 / 20

15
Flexible zone
Where present, this function allows the cooking zone to be used as two separate zones or as a single extra
large zone.
It is perfect for oval, rectangular and elongated pans (with maximum base dimensions of 38x23 cm) or
more than one standard pan in the same time. In order to activate the flexicook function, switch on the
hob, press simultaneously the 2 selecting buttons of the zones as shown in the picture below: the two
cooking zone displays show level “0”; both dots next to the level number are lit, indicating that the Flexible
zone is activated.
To change the power level (from 1 to max. 9 or P) press the -/+ buttons. To deactivate the Flexible zone
function, press simultaneously the 2 selecting buttons of the zones.
To switch off the zones instantly, hold one of the zone selection button for 3 seconds.
i
The message “no pot” will appear on the display of the zone that is not able to detect any pot
(because of missing pot, or misplaced or not suitable for induction hob). This message remains active for
60 seconds: in this time you can add or slide pots within the flexicook area as you prefer.
After 60 seconds if no pan is placed on the zone, the system stops “searching” pots on that zone, the
symbol remains visible on the display to remind that the zone is disabled.
To reactivate the Flexicook function, press one of the 2 respective buttons
.
The Flexible zone function is also able to detect when a pot is moved from one zone to the other one
within the Flexible zone area keeping the same power level of the zone where the pan originally was
placed (see the example in the figure below: if the pot is moved from the front heater to the rear heater,
the power level will be shown on the display corresponding to the zone where the pot is placed).
It is also possible to operate the Flexible zone area as two independent cooking zones, using the
corresponding button of the single zone. Place the pot in the centre of the single zone and adjust the
power level with the slide touchscreen.
i
Important: make sure to place the pans centred on the cooking zone in the way to cover the centre of
the single cooking zone.
In case of big pot, oval, rectangular and elongated pans make sure to place the pans centred on the
cooking zone.
Examples of good pot placement and bad pot placement:
Instructions for use