KitchenAid KERS306BSS, Инструкция по использованию и уходу

Страница: 19 / 24

19
Oven Light
The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the off position.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call.
www.kitchenaid.com
Operation
PROBLEM POSSIBLE CAUSES SOLUTIONS
Nothing will operate Power supply cord is unplugged. Plug into a grounded outlet.
Household fuse is blown or a circuit
breaker is tripped. Replace the fuse or reset the circuit breaker. If the problem continues,
call an electrician.
Range is in Sabbath Mode. See “Sabbath Mode” section.
Cooktop will not operate The control knob is set incorrectly. Push in knob before turning to a setting.
The range is in Demo Mode. Demo Mode will deactivate the Warm Zone element. See “Demo
Mode” in the “Electronic Oven Controls” section.
Excessive heat around
cookware on cooktop Cookware that is not the proper size Use cookware about the same size as the surface cooking area,
element or surface burner. Cookware should not extend more than
½" (1.3 cm) outside the cooking area.
Cooktop cooking results
not what expected Control knob set to incorrect heat
level See “Cooktop Use” section.
Range is not level. Level the range. See the Installation Instructions.
Oven will not operate The electronic oven control was set
incorrectly. See “Electronic Oven Controls” section.
Delay Start was set. See “Cook Time” section.
The oven control lockout is set. See the control lock keypad feature in the “Feature Guide” section.
The range is in Demo Mode. Demo Mode will deactivate all heating elements. See “Demo Mode”
in the “Electronic Oven Controls” section.
“FEATURE NOT
AVAILABLE” is displayed
when trying to use the
Control Lock function. A cooktop or oven function is active,
including the timer or timed cooking
features, or the oven is hot or a
cooktop hot surface indicator is lit. Ensure that all cooktop and oven functions are off, and that the
cooktop and oven are cool. If this does not work, call for service. See
cover for contact information.
Convection fan not
working Oven door is open. Close oven door. See “Convection Cooking” section.
Oven temperature too high
or too low Oven temperature calibration needs
adjustment See “Oven Temperature Offset Control” in the “Electronic Oven
Controls” section.
Temperature has been changed to
Fahrenheit or Celsius. See “Fahrenheit and Celsius” in the “Electronic Oven Controls”
section.
Oven indicator lights flash Needs service (oven indicator lights
are flashing) See “Control Display” in the “Electronic Oven Controls” section. If the
indicator light(s) keeps flashing, call for service. See cover for contact
information.
Display shows messages Power failure (display shows flashing
time) Clear the display. On some models, reset the clock, if needed. See
“Clock” keypad feature in the “Feature Guide” section.
Error code (display shows letter
followed by number) Press the OFF keypad to clear the display. See “Control Display” in
the “Electronic Oven Controls” section. If it reappears, call for service.
See cover for contact information.