10
Avoids unintended use of the dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Lock, press and hold TOP RACK ONLY for 3 seconds. The Top Rack Only/Contol Lock light will stay on for a
short time, indicating that it is activated, and all buttons are disabled. If you press any button while your dishwasher is
locked, the light flashes 3 times. The dishwasher door can still be opened/closed while the controls are locked.
NOTE: You may need to disable Sleep Mode by pressing either START/RESUME or CANCE/DRAIN, or by opening and
closing the door before you are able to turn Control Lock off.
To turn off Control Lock, press and hold TOP RACK ONLY(Control lock hold 3 seconds) for 3 seconds. The light turns off.
CONTROLS AND CYCLE STATUS
CONTROL
PURPOSE
COMMENTS
To start or resume a
wash cycle
If the door is opened during a cycle or the power is interrupted, the Start/Resume indicator
flashes. The cycle will not resume until the door is closed and START/RESUME is pressed.
NOTE: If the Start/Resume button is located on top of door, push door firmly closed within
3 seconds of pressing START/RESUME. If the door is not closed within 3 seconds, the
Start/Resume button LED will flash, an audible tone will be heard, and the cycle will not
start.
To reset any cycle or
options during
selection.
To cancel a wash
cycle after it's
started.
Press and hold CANCEL/DRAIN to reset any control selections made.
See “Canceling A Cycle” and “Changing A Cycle After Dishwasher Is Started” sections.
To turn the audible
tones on or off.
Press and hold the Hi-Temp Wash button for 3 seconds to turn the audible tones on or off.
Only audible tones for confirming button presses can be turned on/off. Important audible
tones, such as indicating a cycle has been interrupted, cannot be deactivated.
OPTION SELECTIONS
OPTIONS
CAN BE
SELECTED WITH
WHAT IT DOES
ADDED TIME TO CYCLE
ADDED
WATER
GALLONS
(LITERS)
TYPICAL
MAX
