12
USING YOUR OVEN
Making Temperature Calibrations
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door during cycling may
give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit
or Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as
a guide.
ADJUSTMENT °F
(AUTOMATIC °C CHANGE)
COOKS FOOD
30°F (15°C)
... much more
20°F (10°C)
... moderately more
10°F (5°C)
... a little more
0°F (0°C)
... default setting
-10°F (-5°C)
... a little less
-20°F (-10°C)
... moderately less
-30°F (-15°C)
... much less
To Adjust:
1.
Touch MORE.
2.
Touch SETTINGS.
3.
Touch CALIBRATION.
4.
Touch “plus” (+) or “minus”
(-) signs to increase or
decrease temperature
calibration level by 5
degrees.
MAIN MENU
More
Steam Cook
Convert
Bake
Broil
Bread Proof
Keep Warm
Delay Cook
Self Clean
Settings
Contact Info
MAIN MENU
< Back
SETTINGS
More
< Back
Sound
Display
Contrast
Temp
Format
Calibration
Water Filter
Sabbath
Mode
Enter temp offset between
35°
and
-35°F
CALIBRATION
Tips
Temp Offset
0°
OK
+
-
Managing the Water Filter/Filtration System
The Water Filter setting allows you to check the status of
the water filter and reset the system after the filter has been
replaced.
IMPORTANT: The oven will shut off the steam functions until the
filter is replaced.
To Check Filter Status:
Notes:
■
If you reset the system without replacing the filter, the system
will continue to notify you that the filter needs to be replaced.
The oven will shut off the steam functions until the filter is
replaced. Continuing to reset the system without replacing the
filter may cause damage to the oven.
■
It is normal to hear sounds during steam cooking cycles
related to the opening and closing of the water inlet valve
and water flowing into the steam system.
■
For information on ordering replacement filters, touch
ORDER INFO or see “Assistance or Service” section.
1.
Touch MORE.
2.
Touch SETTINGS.
3.
Touch WATER FILTER.
4.
If filter status is Replace
Filter Soon or Replace Filter,
replace filter and touch
RESET for approximately 3
seconds to reset the system,
and then touch OK.
NOTE: See “Water Filter
Cartridge Replacement”
section.
MAIN MENU
More
Steam Cook
Convert
Bake
Broil
Bread Proof
Keep Warm
Delay Cook
Self Clean
Settings
Contact Info
MAIN MENU
< Back
SETTINGS
More
< Back
Sound
Display
Contrast
Temp
Format
Calibration
Water Filter
Sabbath
Mode
If you have replaced the filter, press and
hold the Reset button for 3 sec.
Replace
Good
WATER FILTER
OK
Reset
Order
Info
I I
I
I I I
I
I I
Содержание KDRU767VSS
Страница 79: ...79 NOTES ...