3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
■
Level
■
Phillips screwdriver
■
Short Phillips screwdriver or a 90° screwdriver with a Phillips
screw bit
■
Tape measure
■
Slip-joint pliers
■
Pipe wrench
■
Adjustable wrench
Parts supplied
■
Faucet
■
Cutting board
■
Ice bin covers
■
4 - Condiment bins with lids
■
Bottle cap container
■
Bottle container
■
Rear mounting flange and mounting screws (on built-in model
only)
Parts needed
■
NSF or UPC listed water connection lines or hose
■
All weather clear silicone
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Product Dimensions
Freestanding Models
The freestanding model must have suitable drain systems in
accordance with local codes for the ice bin and sink drains.
Built-In Models
Cabinet Dimensions (for built-in model)
Provide suitable drain systems in accordance with local codes for
ice bin and sink drains. The drains and filter must be accessible.
A. 17
¹⁄₄
" (43.8 cm)
B. 30" (76.2 cm)
C. 36
⁷⁄₈
" (93.7 cm)
D. 26
³⁄₈
" (67.0 cm)
A
A
C
D
B
A. 26
³⁄₈
" (67.0 cm)
B. 30" (76.2 cm)
C. 10" (25.4 cm)
D. 22
³⁄₄
" (57.8 cm)
A
C
D
B
