16
16.
Insert the valve stem into the knob and push knob into place.
17.
The igniter battery is not factory installed. A “AA” size alkaline
battery is located in the accessory box on the grill grate.
Install battery at this time following the instructions in
“Replacing the Igniter Battery” section.
Attach Left Side Shelf
1.
Unpack left side shelf.
2.
Open grill lid.
3.
Remove 3 screws from the side of the side shelf.
4.
Remove the screw from the central post, then 2 screws on
the grill side panel and 1 screw on the grill control panel.
5.
Lower the side shelf so that the side shelf center post (A)
slides into the bracket (B) and align the bottom keyhole slots
on the side shelf with the screw holes on the grill side panel.
IMPORTANT:
This step is meant to help with the installation, but
do not depend solely on the bracket to hold the weight of the
side shelf.
6.
Attach the top of the side shelf to the grill (B) by inserting the
3 screws removed in Step 3 into the side shelf from inside the
grill hood and tighten. See illustration in Step 8.
7.
Attach the bottom of the side shelf to the side panel (A and D)
of the grill by inserting the 3 screws removed from the grill
side panel in Step 4. The drip pan may need to be pulled
forward to install the center screw (D). Tighten the screws.
See illustration in Step 8.
8.
Attach the side shelf to the control panel (C) by inserting the
screw removed from the grill control panel in Step 4. Tighten
the screw.
A. Side shelf screws
A. Grill side panel screws
B. Grill control panel screw
A
A
B
A
B
A
B
C
D
Note: A, B, C, and D are illustrations for steps 6 through 8
Содержание 720-0733
