KitchenAid 5KSM6583C, Инструкция по эксплуатации

Страница: 13 / 32

TROUBLESHOOTING
|
13
ENGLISH
Bowl, coated flat beater, coated dough
hook, Flex Edge beater, and pouring
shield (top shelf only) may be washed in
a dishwasher; or clean them thoroughly
in hot sudsy water and rinse completely
before drying. Do not store beaters on
shaft.
TROUBLESHOOTING
Please read the following before
calling your service center.
1. The Stand Mixer may warm up during
use. Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of
the Stand Mixer. This is normal.
2. The Stand Mixer may emit a pungent
odor, especially when new. This is
common with electric motors.
3. If the flat beater hits the bowl, stop
the Stand Mixer. See “Beater to Bowl
Clearance.”
If your Stand Mixer should malfunction
or fail to operate, please check the
following:
- Is the Stand Mixer plugged in?
- Is the fuse in the circuit to the Stand
Mixer in working order? If you have a
circuit breaker box, be sure the circuit
is closed.
- Turn the Stand Mixer to the “0” (Off)
position for 10-15 seconds, then turn
it back on. If the mixer still does not
start, allow it to cool for 30 minutes
before turning it back on.
If the problem is not due to one of
the above items, see the KitchenAid
Warranty. Do not return the Stand Mixer
to the retailer, as they do not provide
service.
CARE AND CLEANING
©2018 All rights reserved.
KITCHENAID and the design of the stand mixer are trademarks in the U.S. and elsewhere.
IMPORTANT: The wire whip is not
dishwasher-safe. Clean it thoroughly in
hot sudsy water and rinse completely
before drying. Do not store wire whip
on shaft.
W11266857B.indb 13 11/13/2018 1:05:57 PM