Shock Accelerometer
Page 23
002-096e-01.19
8.3
Repairs
Field repair is not possible. Please return the accelerometer to the
factory together with a statement of problems encountered and unit
serial number. Recalibration is recommended when returning an
accelerometer to the factory. Please contact the factory and obtain a
return authorization number prior to return.
8.4
Cleaning
Clean the transducer with Isopropyl alcohol and lint-free paper wipes.
Never use air-blast to clean the connector; it may deposit a water
vapor film. Excess cyanoacrylate adhesive (e.g. Eastman 910, Loctite
430, etc.) on the mounting surface may be removed with
dimethylformamide or acetone. Refer to the adhesive manufacturer's
product data for recommended removal agent.
Do not us an abrasive on the base surface. This can affect the flatness
thereby reducing high frequency transmissibility.
8.5
Calibration
Calibration consists of the precise determination of the accelerometer
sensitivity by direct comparison, at various frequencies, to a National
Institute of Standards and Technology (NIST) traceable standard
accelerometer. The test accelerometer is attached to the top of the
standard in a "back-to-back" configuration. The standard and test
accelerometer are excited at appropriate frequencies and levels. The
resultant amplitudes of both accelerometers are then compared to
determine if the test unit is within tolerance.
Kistler is an accredited ISO 17025 Laboratory and offers such
calibration services. A calibration certificate will be supplied showing
calibration results from standards traceable to NIST.
