9
How to connect my player
3
- Extra information is also available from www.kiss-technology.com
We recommend connecting your player to your television using the SCART cable that comes with your player. The SCART cable is the biggest cable with the large connectors in the ends.
Connect the power cable to the power connector.
If your television does not have a SCART connector, you will have to connect both audio and video with separate cables.
For connecting video, you have the following options:
• VIDEO (composite video)
• S-VIDEO (or “super-VHS”, provides a better quality than VIDEO)
• COMPONENT VIDEO (provides an even better quality than the above)
After connecting the video, you will have to connect the audio. You can connect the audio to either the television or your HiFi set. The DP-1100 outputs both analog and digital audio.
Analog audio is the most common format, and is supported by most devices. Digital audio is more common on high-end equipment and surround amplifiers.
For connecting the audio, you have the following options:
• Connect ANALOG AUDIO OUT to your television using phono (RCA) jacks
• Connect ANALOG AUDIO OUT to your HiFi stereo using phono (RCA) jacks
• Connect COAXIAL or OPTICAL digital audio to your HiFi stereo
KiSS DP-1100
Amplifier
2
3
1
5
4
3
2
1
KiSS DP-1100
TV
Video connection
Audio connection
Connecting your KiSS DP-1100 DVD player to your TV can be done using any of the cables below.
(Only one cable can be connected at a time)
1 RGB
via
SCART
2 S-Video (the cable is an extra accessory)
3 Composite
via
SCART
4 Composite
Video
5 Component
SCART
(the
cable
is an extra accessory)
Connecting your KiSS DP-1100 DVD player to your amplifier can be done using any of the cables below.
(Only one cable can be connected at a time)
1 Analog
Stereo
2 Coaxial Output (the cable is an extra accessory)
3 Optical Output (the cable is an extra accessory)
