KisanKraft
®
Tea-Leaf Harvester
KK-TH-JP600
: +91.80. 22178200
Page 7 of 32
BEFORE GETTING STARTED
We wish to thank you for choosing our product. We are confident that the high quality of
our product will meet your requirement and will give you long-lasting service. In order to
avoid accidents or injury, please read this manual and that of gasoline engine carefully
before using the machine. After reading, preserve this manual for further reference.
SAFETY INSTRUCTIONS
1.
When a borrower or a new operator is using this unit, please read the guide for safe
operation before using.
2.
The following shall not be allowed to operate the machine:
A).Children b). Pregnant Woman c). Mentally challenged d).Person who is sick, tired, is
under the influence of alcohol or any other drug.
3.
Operator’s Clothes
➢
Do not wear loose clothing that might get caught in moving parts.
➢
Please wear brimmed cap and eye protection glasses.
➢
Please wear gloves during inspection and maintenance.
➢
Please wear anti-skid shoes.
4.
In order to ensure there is no fire or smoke:
➢
Don’t store the fuel at places liable to catch fire.
➢
Don’t smoke when starting the engine or refilling the fuel.
➢
Stop the engine when refilling the fuel, in case of accidental turning over of the
machine or spattering fuel into machine body. Please wipe out the fuel on the
machine body with dry cloth.
ASSEMBLY INSTRUCTIONS
1.
Pull the flexible pin on the power take-off point. Insert the flexible shaft-
blanket’s with
a hole into the hole.
2.
Turning round the flexible shaft-blanket, insert the flexible pin into the hole so that this
end is fixed.
3.
At the end of the flexible shaft-blanket with the slot, turning round the quadrate flexible
shaft synchronously, insert the hole to the power.
4.
Adjust the flexible shaft to meet the quadrate hole. Put the flexible shaft-blanket with
a slot in the socket.
5.
Insert the flexible shaft-pin and put the split pin on so that the installation of the flexible
shaft is complete.
OPERATING INSTRUCTIONS
Instructions
before
operation
:
1.
Before every operation, please inspect the machine and make necessary
adjustments.
If you notice any abnormality, please get the machine repaired, and if necessary, to
take it to the authorized dealer for service.
2.
The following inspections are to be done before the operation:
