KisanKraft
®
THERMAL FOGGING SPRAYER
KK-STF-480
,
KK-STF-560
Page
12
of
28
Safely shutdown procedure
:
After the work is completed, first close the solution valve, and then switch off gear
1 and 2. After power off, open one solution box cover to release the excessive gas in
the shortest time
5
.
Notes in operation of the machine:
5-1. If the oil bubble is pressed too many times in
case there is oil in the bubble, which leads to
too much oil in the carburetor, you need to
bring the machine with the nozzle downwards
to poured out the extra petrol. Then the
machine can be started directly without
pressing the oil bubble.
5-2
In the shutdown, if the solution valve is
close
usually the rrIaL;r111Ie is accidentally turned off, it will cause the solution return to
the machine, and the machine does not work. In this case, do not immediately start the
machine again, otherwise the machine will be damaged due to short circuit of the high-
voltage bag. Bring the machine with the nozzle downwards to pour out the extra petrol.
And then start the machine.
KisanKraft
®
THERMAL FOGGING SPRAYER
KK-STF-480
,
KK-STF-560
Page
17
of
28
6-2 No oil to the carburetor
1, Press the start button, at the same time gently continuously press the oil bubble, the
machine can be started
2. If step 1 is not successful, screw off the
bolt of oil
/
gas mixing ratio of gear 1 and 2,
Clean the bottom of the oil
/
gas mixing ratio.
Hole with carburetor cleaning agent.
...,....
Cleaning 5-6 times is enough. . After
cleaning the screw, tighten the screw,
which means rotate it two and a half
rounds counterclockwise. (Note: do not
tighten too much to break it)
6- 3
,
Machine sound and spraying mist not
stable.
..
When the mist or smoke is not stable,
Please adjust the oil
/
gas mixing ratio
screw of carburetor counterclockwise, to
regulate it and make it stable.
