KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 17 of 28
2.
Spark plug (F2-2)
•
After 50 hours of use, the spark plug should be removed. Carbon brush or wire brush will be
used to clean the carbon or dirt of the spark plug on the electrode. The spark plug gap should
be guaranteed to be between 0.6=0.7mm.
•
The spark plug should be cleaned or replaced every 100 hours or every quarter to ensure the
performance of the spark plug.
•
Do not sandblast clean the spark plugs, use carbon brush, or wire brush to clean or remove
the carbon solvent. If the cap spring is not fully installed in the spark plug, the spark may not
appear. If necessary, the connection of the wire can be corrected. Please use the
manufacturer to specify the brand.
•
When installing the spark plug, turn it with your hand first and tighten it with the special socket
wrench of spark plug. (If the force is too high, the cylinder and spark plug will be damaged. If
the screw force is too small, there will be air leakage). The torque is 15.3=22.4N*m
