Kisae DMT1230, Руководство пользователя

Страница: 16 / 24

REV D Page 16
7. SPECIFICATIONS
Note: Specifications are subject to change without notices.
Output Rating DMT1230 DMT1250 DMT2430
Output Current (Maximum) 30A 50A 30A
Output Voltage 12V Nominal 24V Nominal
Output Power (Maximum) 465W 775W 930W
Charger DC Output- House Battery (CH1):
Selectable Battery Type GEL, AGM, Flooded, Lithium, Program
Bulk /Float Voltage Range GEL: 14.4 / 13.7 Vdc 28.8 / 27.4 Vdc
AGM: 14.6 / 13.6 Vdc 29.2 / 27.2 Vdc
Flooded: 14.4 / 13.3 Vdc 28.8 / 26.6 Vdc
Lithium: 13.9 - 14.6 Vdc 27.8
– 29.2 Vdc
Program: 13.8 - 14.8 Vdc 27.6
– 29.6 Vdc
Restart Voltage
(GEL, AGM, Flooded, Program)
12.5 Vdc 25.0 Vdc
Restart Voltage
(Lithium)
13.3 Vdc 26.6 Vdc
Charger Current (User Selectable) 5/ 10 / 20 / 30A 5-50A (5A steps) 5/ 10 / 20 / 30A
Equalized Voltage (Flooded Battery only) 15.5 Vdc 31.0 Vdc
Equalized Charging Current 10% of Bulk Current Setting
Charging Control GEL, AGM Flooded, Program Mode: Two or Three Stages
Lithium: Three Stages only
DC Output Bank Single
Current draw from CH1 with unit ON < 70 mA
Current draw from CH1 with Unit OFF < 200 uA
Battery Temperature Setting Low / Normal / High (automatically overridden with optional BTS)
Efficiency 95%
Minimum Operating Voltage 8.0 Vdc 16.0 Vdc
DC Input - Solar Array/Panels (CH2- Solar):
Input Voltage 14.5
– 50 Vdc
Maximum Solar Input Current 30A
Maximum Solar Input Power: 12V Panel
24V Panel 500W (600W max)
500W (600W max) 500W (600W max)
750W (800W max) 500W (600W max)
900W (1080W max)
DC Input
– Alternator/ Start Battery (CH3- Alternator/Start):
Input Voltage 10.5
– 16.0 Vdc / 21 – 32 Vdc
Maximum Input Current (as per max. setting) 50A
Environmental and Operating Temperature:
Storage Range -40° to 70° C (-40° to 158° F)
Operating Range -20° to 60° C (-4° to 140° F)
Humidity 5-95%, RH non-condensing
Ingress Protection IP32
Weight and Dimensions:
DMT1230. 1250 4.1 lb., 9.5x6.8x2.9 inches (1.85 Kg, 242x172x74 mm)
Regulatory Compliance:
Standards/EMC (North America) Class B according to FCC part15B and ANSI C63.4
Standards/EMC (European Union) CE marked for the EMC directive 2004-108-EC
Complying with EN55014-1, EN55014-2, EN61000-3-2 and
EN61000-3-3 (as equivalent IEC standards series)
Optional Accessories:
Remote Digital Display DMTRM01 (For DMT1250, DMT2430 use only)
Battery Temperature Sensor BTS-10K (Not required for Lithium or Program settings)