Kisae Abso Charger 12V 100A, Руководство пользователя, Страница: 19 / 26

Page 19
6. SPECIFICATIONS
AC12100 AC2450
Charger Output:
Output Current (Maximum) 100A 50A
Output Voltage Range:
Charge 13.8 – 14.8 V 27.6 – 29.6 V
Float 13.0 - 13.8 V 26.0 – 27.6 V
Equalize (Flooded Battery) 15.5 V 31.0 V
Charging Control Three stages (Bulk/Absorption/Float)
Two stages (Bulk/Absorption)
DC Output Bank Three (CH1, CH2, CH3)
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Parasitic Current < 2 mA
Charger Input:
AC Input Voltage (Nominal) 100, 120, 220, 230, 240 VAC
AC Input Operating Range 90 - 265 VAC
AC Input Frequency Range 47 - 63 Hz
Power Consumption (Full Load) 1750W 1750W
Power Factor Correction Yes
Charger Efficiency > 82%
Protection and Features:
Reverse Battery Yes, unit shutdown
Over Charge Yes, unit shutdown
Over Temperature Yes, unit de-rated and shutdown
Output Short Circuit Yes, unit shutdown
Cooling Force air ventilation
Temperature Setting Hot, Normal, Cold (with no sensor connected)
Battery Temperature Sensor Port RJ12 (for use with optional Battery Temperature Sensor)
Remote Display Port RJ12 (for use with optional Remote Display Panel ACRM1202)
Display:
LCD Display (with back lighting) Charging status, Battery Voltage
Warning and Fault Code A01, E01-09
AC Input and DC Output Connection:
AC Input Connection Hardwire or AC with EU, UK, AZ plug
DC Output Connection (POS) Heavy Duty Screw Terminal (3 banks)
DC Output Grounding (NEG) Heavy Duty Common Ground Screw Terminal
Environmental and Operating Temperature:
Storage Range -40° to 70° C (-40° to 158° F)
Operating Range -20° to 60° C (-4° to 140° F)
Humidity 5-95%, RH non-condensing
Ingress Protection IP32
Based Unit Weight and Dimensions:
Weight 12.3 lbs ( 5.6 Kg)
Dimension 9.3 x 16.7 x 4’ (236 x 425 x 102.7 mm)
Regulatory Compliance:
Standards/Safety (North America) Approved to UL1236 including the marine supplement
UL1564
CSA C22.2 107.2-01
Standards/Safety (European Union) CE marked for the low voltage directive 2006-95-EC
Complying with EN60335-2-29 battery chargers
Approved to IEC60529:2001, IP32 ingress protection level
Standards/EMC (North America) Class B according to FCC part15B and ANSI C63.4
Standards/EMC (European Union) CE marked for the EMC directive 2004-108-EC
Complying with EN55014-1, EN55014-2, EN61000-3-2, and EN61000-3-
3 (as equivalent IEC standards series)
Note: Specifications are subject to change without notice.
Accessories (optional):
Remote Display Panel ACRM1202
Battery Temperature Sensor BTS-10K