D I R E C T H E A L T H C A R E G R O U P. C O M
1 0
F L O R I E N I I
6.4. Tilt-in-Space
What is Tilt-in-Space?
Tilt-in-space is a pivoting system that provides a reclined, resting position whilst maintaining posture and pelvic stability.
The main purpose of tilt-in-space positioning is to decrease the pressure in the buttocks area and to provide muscle relaxation in the
lower part of the back.
Tilting the chair re-distributes the occupant’s weight over a larger contact surface area, making a simple yet effective way to combat the
build-up of pressure in the buttocks area.
Operation
It is recommended that the tilt-in-space angle is changed at regular intervals to reduce the risk of the
occupant developing pressure sores.
Locate the lever on the right hand side of the push handle at the rear of the chair and squeeze towards
the push handle to release the tilt lock.
Apply firm downward pressure with both hands on the push handle to tilt the chair backwards, or lift
the push handle upwards to raise the chair.
• At any point during the upward or downward tilt motion the lever can be released and the chair will
lock in the selected position.
• It is always advisable to adjust the positioning of the legrest once the tilt-in-space positioning has
been chosen, to ensure a correct and comfortable posture.
WARNING
Never leave a user with poor postural sitting ability in a
fully upright position without supervision as they may tip
forwards out of the chair.
CAUTION
It is recommended to use a lap-belt or pelvic positioner
(optional accessories) with users with poor postural
sitting ability.
WARNING
Ensure the users hands are clear from the back of the
chair whilst the chair is being tilted, to avoid any risk of
pinching within the tilt mechanism.
WARNING
Always ensure there is nothing to obstruct the free
movement of the chair.
6.5. Seat Depth Adjustment
While the seat depth will be set to the depth specified at the time of manufacture, this can be adjusted if required at a later date.
The Florien II offers three seat options for the seat depth, 435mm, 460mm or 485mm.
To adjust the seat depth:
• Locate the four thumb screws beneath the seat module.
• Unscrew all four thumb screws.
• Move the seat module back or forwards to the desired position, locating the thumb screws into the correct holes.
• Re-secure all thumb screws
CAUTION
Always ensure the thumb screws are tightened firmly after adjusting the seat depth.
IMPORTANT
Only adjust the seat length when the chair is unoccupied.
