manualshive.com logo in svg

Kirsch 095 05 25000, Руководство по эксплуатации, Страница: 40 / 75

Поделиться
Скачать
Kirsch 095 05 25000 Скачать руководство пользователя страница 40

Recommended temperature warning limits
The temperature warning limits must not be the

same as the target temperature.

Set the temperature limits as follows:

–

Upper temperature warning limit: at least 3 °C

higher than the target temperature

–

Lower temperature warning limit: at least 3 °C

lower than the target temperature

Recommended temperature warning limits for

FROSTER
To ensure that the unit functions properly, the tem-

perature warning limits must be set for FROSTER

models as shown in table 

Ä

 “Temperature warning

limits” on page 39.

1.

Insert unit key in key switch.

2.

Turn unit key to position “P”.

3.

Press and hold button 

[Temperature warning max.]

.

4.

Press button 

[Max.]

 repeatedly until the value for the new

upper temperature warning limit is reached.

5.

Press button 

[Min.]

 repeatedly until the value for the new

lower temperature warning limit is reached.

6.

Turn unit key to position “1”.

ð

The Display shows the current interior temperature.

The set temperature warning limits are

saved automatically. The temperature

warning limits are retained after a power

failure and after the unit has been

switched off.

Changing the temperature warning

limits

 Commissioning

Programming the unit > Temperature warning limits

27.05.2021

Refrigerator/freezer LABEX® series

40

Содержание 095 05 25000












































































Отзывы:

Нет отзывов