Kirkland Signature PTH106A-SS, Инструкции по установке, эксплуатации и обслуживанию

Страница: 16 / 18

IMPORTANT NOTICE:
DO NOT return to place of purchase!!!
Please contact Customer Service hotline at 800-913-8999 for help.
TROUBLE SHOOTING
Problem Possible Causes Correction
Pilot won’t
„
Air in gas line
„
Lowe gas pressure
„
Gas line turned ‘OFF’
„
Blockage in gas line
„
Pilot orifice is clogged
„
Control knob not in pilot position
„
Control knob not pressed in while in
pilot position
„
Igniter electrode positioned wrong
„
Igniter electrode broker
„
Igniter cable pinched or broken
„
Igniter cable not connected to gas control
„
Tilt switch in trip angle/OFF position
„
Bad thermocouple
„
Corrosion of thermocouple contact
„
Safety interlock is triggered
„
Bad gas valve
„
Control knob not pressed in long
enough
„
Thermocouple connection loose at gas
control or damaged
„
Pilot flame not touching the
thermocouple
„
Low gas pressure
„
Blockage in burner orifice
„
Control knob not in ‘ON’ position
„
Purge gas line and repeat ignition operation
„
Check gas pressure
„
Turn ‘ON’ gas supply
„
Check gas passage way
„
Call a qualified person
„
Turn control knob to pilot position
„
Press in control knob while in pilot position
„
Correct electrode position
„
Replace electrode
„
Free igniter cable, if damaged replace assembly
„
Connect cable to igniter
„
Reset the Heater keep in vertical position
„
Replace thermocouple
„
Clean thermocouple contact
„
Wait a minute repeat ignition operation
„
Replace gas valve
„
After pilot lights, keep control knob pressed in
for 60 seconds
„
Tighten connection or replace thermocouple
„
Contact a qualified service person
„
Check gas supply pressure
„
Clean burner orifice
„
Turn control knob to ‘ON’ position
light
Igniter did not
spark
Pilot won’t
stay lit
Main burner
won’t light
Page 15