IMPORTANT NOTICE:
DO NOT return to place of purchase!!!
Please contact Customer Service hotline at 800-913-8999 for help.
ASSEMBLY INSTRUCTIONS
Page5
STEP 2. Attach Reflector
z
Combine the three pieces of the reflector together
z
Tighten up with three 5/32
”
(M4) screws.
z
Put the reflector plate on reflector then tighten up
with three 1/4
”
(M6) truss head screws from the
bottom up.
STEP 2
STEP 3: Attach The Reflector nut & Post
.
z
Screw the 1/4
”
x 2-3/4
”
(M6x60mm) dual threaded
end-stud into the emitter top.
z
Attach the reflector, dome cap and nut onto the
emitter top. It screws onto one end of the dual
threaded end stud screwed into the emitter top.
z
Insert the gas hose from the heater down through
the pedestal post.
z
Attach the pedestal post onto the heater head with
four 3/16
”
(M5) truss head screws.
STEP 3
