8
9
12.Monitor
momentary
13.Monitor
14.Squelch off
momentary
15.Squelch off
16.Lone worker
reset
17
18.Squelch
Level
Selection
6. Talk-around
In the communication network, you can expand communication
range through the repeater, but when the mobile radio is out of the
communication range, you can connect with other radio in the
talk-around method.
Switch the talk-around or repeater mode through "Talk-around"
button.
7. Scan
The radio can be programmed to scan multiple channels to
receive signals.
7.1 Start/End Scan Function
Press the button programmed for "Scan" to enable scanning.
When the scan function is enabled, the "SCAN" indicator is on
and the channels being scanned are also displayed. Press the
"Scan" button again to disable scanning and the"SCAN"
indicator will be out.
Press this button to enter the Squelch Level Adjustment
Mode first, and then press the / button to adjust the level.
Press the PTT button to save the selected squelch level and
quit this mode. Press any other button to quit without saving.
Hold to disable CTCSS/DCS signaling according to the
setting to resume normal operation.
Press to disable CTCSS/DCS signaling to receive signals
that cannot be heart in normal operation, press again to
resume normal operation.
Hold to enable squelch and loosen to resume normal
operation.
Press this button to open the squelch. Press it again
to return to the normal operation.
Press this button in the selective call state to quit such a state.
After enabling the Lone worker, press this button to
reset the Lone worker timer and the timing resumes.
Start/end the public address function. Press this button and
the function will be activated. Press the PTT button and speak
to the micro-phone so that you can hear your voice through
the external speaker.Press this button once again and return
to the normal user mode.
.Public
Address
the current sending power is low.
5. Radio call
A.Press the button programmed as call Button 1 or call Button 2
to send the preset code .
B.Press PTT and talk with the microphone in the normal voice.
Please keep the microphone about 3-4cm away from your lips.
When finish talking, release PTT .
"
"
"
"
"
"
"
"
7.2 Nuisance Delete
If a channel continuously generates noise or interference, press
the button to remove this channel from the scan list temporarily.
Note: the priority channel can't be removed and the last one in the
scan list, either.Quit the Scan mode and enter it again, the deleted
channel will be added to the scan list again.
