12
13
2. Connect the slave radio with the wired clone cable first, and then
turn on.
3. Press button [P2] on the master radio for starting clone. During
transmitting the data, the master radio lightens red, and the slave
radio lightens green and indicates "P". After the slave radio recei-
-ving all the data, the red light on the master radio is off, and the slave
radio restarts.
4. You can keep cloning according to step 3 above.
13. Trouble Shooting Guide
Problem
Power on
Failure
Phase lock loop
unlocked
(Beeping)
No talkback
No receiving
signal
Solution
A. The power cable is not connected with the accumulator or the host
reliably. Please connect the power cable reliably.
B. The protective tube of power cable is burnt out. Please change it.
C. The power button is of poor contact. Please change th e silica
gel button or PCB button.
D. The rechargeable battery is out of power. Please recharge or
change a new one.
E. CPU is broken, Please change the IC.
A. Channel frequency beyond the range, reset channel data.
B. The crystal X1 of phase lock loop is broken. Please change it.
C. The oscillator tube is broken. Please change it.
D. The IC3 of phase lock loop is broken. Please change IC.
A. The frequency is not right. Please reselect the channel
of the same frequency.
B. The CTCSS/DCS code is not the same. Please reset it.
C. It is out of the effective communication range.
A. The antenna is not in good contact. Please fasten the antenna
head.
N Problem Solution
The red transmission
Indicator lights but no
sound is heard.
The green receiving
indicator lights but no
sound is heard.
10
B. The high-frequency amplifying tube Q18 is broken.
Please change it.
C. The squelch level is set to high Please reset the
squelch level.
D. The mixed tube Q19 is broken. Please change it.
E. The FM IC6 is broken. Please change IC.
A. Power module IC1 damaged, no power output,
please change the module.
B. MIC damaged, please change it.
A. The speaker is broken. Please change it.
B. The audio power amplifierIC7 is broken. Please
change IC.
14. Major Specifications
Frequency Range: 136MHz~174MHz 438MHz~490MHz
Channel Number: 8
Channel Spacing: 25kHz (wide band)/12.5kHz (narrow band)
Operating Voltage: 13.6V Dc
10%
Operating Temperature: -25 -+55
External Dimension: machine only: 150mm*53mm*130mm;
plus fixed bracket: 165mm*62mm*130mm
Weight: machine only: 1030g;
Plus fixed bracket: 1310g
clone mode. If the function is disabled, it will enter the user mode.
N
5
6
1
2
3
4
O.
O.
