5
* The built-in protection circuit in the battery will cut off power when power appears low. If you
charge it in the charger then, the red indicator won’t light immediately. About 1~5 minutes later,
the charger indicator will become normal.
Installing/Removing the Battery Pack
安装
/
取下电池
Installing the Battery Pack
Match the 2 bulges of the battery pack with the corresponding slots at the rear bottom of the radio.
Installing the Battery Pack
Then firmly press the battery pack downwards to lock it in place until a click is heard.
Removing the Battery Pack
To remove the battery pack, push the latch upwards and then pull the battery away from the radio.
Notice:
* Do not short-circuit the battery terminals or dispose the battery in fire.
* Do not disassemble the battery casing.
Installing the Antenna
安装天线
Screw the antenna into the connector at the top of the radio by holding the bottom of the antenna
and turn it clockwise until secure.
■
Radio Overview
熟悉本机
①
LED Indicator
Lights red when transmitting; lights green when receiving.
Flashes orange when receiving the identical 5-Tone or 2-Tone signaling.
Flashes red when battery power appears low.
②
Channel Selector
Rotate to select channel 1~16.
③
Power/Volume Knob
Turn clockwise to switch on the radio.
Turn counterclockwise till a click is heard to switch off the radio.
Rotate to adjust the volume after turning on the radio.
④
PTT (PUSH-TO-TALK) Button
To make a call, press and hold the PTT button, then speak into the microphone in normal voice.
Release the PTT button to receive signals.
⑤
Side Button 1
(Programmable Button)
