13
SP Un-mute
The dealer can the conditions to activate the speaker. There are 6 options:
1)
Carrier wave: The speaker will be activated when carrier wave is detected.
2)
Carrier wave + selective signaling: The speaker will be activated when carrier wave is
detected and the selective signalings are identical.
3)
Carrier wave or selective signaling: The speaker will be activated when carrier wave is
detected or the selective signalings are identical.
4)
CTCSS/DCS: The speaker will be activated when CTCSS/DCS signalings are identical.
5)
CTCSS/DCS + selective signaling: The speaker will be activated when CTCSS/DCS and
selective signalings are identical.
6)
CTCSS/DCS or selective signaling: The speaker will be activated when CTCSS/DCS or
selective signalings are identical
DTMF
The dealer can set DTMF signaling into encoding sequence. If DTMF is set in the encoding
template, press the corresponding programmable button “Call 1” or “Call 2” to transmit the
coding.
5-Tone
The dealer can activate or inactivate this function by programming.
5-Tone has 17 encoding formats: CCIR1, CCIR2, PCCIR, ZVEI1, ZVEI2, SVEI3, PZVEI,
DZVEI, PDZVEI, EEA, EURO SINAL, NATEL, EIA, CCITT, MODAT, USER DEFINED 1,
and USER DEFINED 2. The last tow formats are user defined.
1) 5-Tone Decoding
When receiving proper 5-tone signaling, squelch will be activated according to the “SP un-mute”
mode defined by the user. You can receive the call and LED flashes orange.
After decoding successfully, the radio will work according to the decoding call response set by the
dealer.
2) 5-Tone Encoding
If the PTT ID on the channel you select has been set with 5-Tone, 5-Tone signaling will be
transmitted when making a call.
Or transmit 5-Tone signal by pressing the Call 1 or Call 2 button,, which can be set by the dealer.
2-Tone
The dealer can activate or inactivate this function by programming.
1) 2-Tone Decoding
When receiving proper 2-Tone signaling, the radio will work according to the decoding call
response set by the dealer. LED flashes orange.
2) 2-Tone Encoding:
If the PTT ID on the channel you select has been set with 2-Tone, 2-Tone signaling will be
transmitted when making a call.
Or transmit 2-Tone signal by pressing the Call 1 or Call 2 button, which can be set by the dealer.
