40
Operating/Maintenance Tips
PART FIVE
Your Kirby® Sentria® system is a highly sophisticated home main-
tenance system. As with most modern appliances, it requires a modest
degree of routine maintenance to keep it operating efficiently. This section
of the Owner’s Manual presents tips on operating and maintaining your
Sentria system. In this section, we will discuss the following:
Changing the Power Nozzle Belt
Adjusting the Brush Roll for Optimum
Performance
Miscellaneous Parts Replacement
Service Tips
Helpful Answers to Questions/Troubleshooting
CHANGING THE POWER NOZZLE BELT
After extended use, the Power Nozzle Belt on your Sentria® system
may become stretched and worn causing the belt to slip. (See page
10 - Brush Roll Performance Indicator Light.) If this condition exists,
simply replace the old belt with a new one.
NOTE: Use only approved Kirby® belts.
To change the belt, remove the nozzle from the Sentria system.
Then release the belt tension by using the handle on the Belt
Lifter
⑳
to turn it all the way to the right (clockwise) until the
green arrows line up.
➤
Unlock the Rug Plate
by unhooking the two latches on the
rear of the nozzle.
➤
2
1
Pull on the rear edge of the Rug Plate to remove from the nozzle.
Note the Brush Roll Bristle Height Adjustment setting (1, 2, or 3).
Lift out the belt and Brush Roll.
➤
3
