28
Optional Accessories
USING THE CARPET SHAMPOO SYSTEM (cont)
As you move the Sentria® system back and forth, foam will be released
and the brush will work it into the carpet.
NOTE: Suds should be dispensed the full width of the tray when the
unit is pulled backward. If not, pull back more slowly or check and
clean the Shampoo Tank Filter, if necessary (see page 30).
After suds have been on the carpet at least five minutes, pick up the
foam by turning the Shampoo Tank to the OFF position. With the unit
at its lowest height level, move the Shampooer over the foam until
the foam is picked up. Some moisture will accumulate in the front
of the tray. Once the carpet is thoroughly dry, vacuum with the
Kirby® Upright.
❏
CLEANING THE CARPET SHAMPOO SYSTEM
Push the Toe-Touch Control Bottom Pedal
⑨
all the way down
to raise the nozzle and tray, then turn the Sentria system OFF
and unplug it.
➤
Turn the Suds Control Valve fully to the left (counter-clockwise)
to the OFF position.
Pull the Small Flexible Hose from the Shampoo Tank.
➤
Raise the Headlight Hood
. Release the belt by turning the
Belt Lifter to the left (counter-clockwise) until the red arrows
line up.
➤
3
1
2
