Kirby Morgan, SuperLite, Band Mask, KMB Band Mask, EXO, SuperMask, SuperFlow, and Rex are all registered trademarks of
Kirby Morgan Dive Systems, Inc. Use of these terms to describe products that are not manufactured by KMDSI is not permitted without
written permission from KMDSI.
© Copyright 1970-2017 Kirby Morgan Dive Systems, Inc. All rights reserved. KMDSI manuals, checklists and technical and training
information is made available for the express use of owner/user of this Kirby Morgan products. No part of this material may be reproduced,
stored in any retrieval system, or transmitted, or used in any form or by any means, whether graphic, electronic, mechanical, photocopy, or
otherwise by technology known or unknown, without the prior written permission of Kirby Morgan Dive Systems, Inc
Copyright 2003-2017, Dive Lab®., Inc. All rights reserved. TechTrnG 03101
STEP
PROCEDURES
INITIALS
b.
Umbilical Strain Release
c.
EGS Hose Quick Disconnect
d.
Boots, gloves, knife, and other accessories
NOTE: All equipment must be adjusted
properly and functioning correctly.
12. Check
Breathing
Diver:
Check to ensure the Mask is breathing easily.
NOTE: The Mask must be breathing easily
and properly
13. Diver(s) Is
Ready
Diver:
Report when you are ready to enter the water.
Technician / Owner: print:____________________________ Date:________________
Signature_______________________________________________________________
Comments:_________________________________________________________
KMDSI
highly
recommends that a certified KMDSI Repair Technician make all repairs and that only
genuine KMDSI repair and replacement parts be used. Owners of KMDSI products that elect to do their
own repairs and inspections should only do so if they possess the knowledge and experience. All
inspections, maintenance, and repairs should be completed using the appropriate KMDSI Modular
Operations and Maintenance Manual(s). Persons performing repairs should retain all replacement
component receipts for additional proof of maintenance history. Should any questions on procedures,
components, or repairs arise, please contact Kirby Morgan Dive Systems, Inc., by telephone at (805) 928-
7772 or via e-mail at
, or contact Dive Lab, Inc., by telephone at (850) 235-
2715 or via e-mail at [email protected].
NOTE:
Use your Maintenance and repair log book P/N 125-001, to record all the maintenance
performed.
