30
HEINRICH KIPP WERK GmbH & Co. KG
Heubergstrasse 2
72172 Sulz am Neckar
Tel. +49 7454 793-0
Fax +49 7454 793-33
[email protected]
www.kipp.com
!
!
3.1 Explanation of symbols
3.2 Appropriate use
3. Safety and warning notes
WARNING
!
… indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
TAKE CARE!
… indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or
damage to property and the environment.
INFO!
… highlights useful tips, recommendations and information for efficient and trouble-free operation.
The Gateway receives the actuation status of up to 6 indexing plungers with status sensor and transmits this
information to the relay outputs.
The relay outputs are connected to the machine control system via cable and forward the information on.
The assignment between an indexing plunger with status sensor and the desired relay output is made by
pairing via the buttons on the control panel.
According to DIN EN IEC 61010-2-201, the Gateway is an open device.
It is therefore permanently mounted in a protected environment, such as a control cabinet, close to the
controller. Operation, primarily for installation and maintenance purposes, should only be carried out by
authorised personnel with access to the operating environment.
The trouble-free function and operational safety can only be guaranteed if the information in this operating
Status: 26.11.2020
