manualshive.com logo in svg

Kipp & Zonen RaZON+, Инструкция по эксплуатации

Поделиться
Скачать
Kipp & Zonen RaZON+ Скачать руководство пользователя страница 69

69

ASCII TCP communication protocol description

Introduction

The ASCII TCP protocol is a subset of the serial communication protocol. This document highlights the differences.

Communication parameters
TCP port 

 

 

: 15001

Number of connections  : 10

When the server has 10 socket connections and receives a new connection request it will accept the new connection and drop the 
oldest connection. The oldest connection is determined on base of the ‘alive’ time. The ‘alive’ time is initially set to the connection 
accept time and is updated when any character is received from the HOST.

In order to keep the connection alive at the application level, the HOST may send a character to the server regularly. However, this 
is not mandatory.

The HOST application must be able to handle disconnection or shutdown of the connection by the server.

Description of the commands
The ASCII TCP interface does not support commands or requests.

Description of the messages
No difference with the serial protocol.

Содержание RaZON+









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды