KP310V1.0 Controller Operation Manual
- 3 -
5.
Operation
5.1
Function of keys
Stop
／
Reset
Genset is running, press
to stop genset, when genset is in
alarming status, press
to reset.
In
“
System Set
”
mode, press
to return to the previous
sub-menu.
Manu
／
ATS
Press
to set genset in “Manual” Mode.
In “System Set” mode, press
to decrease the data value, equal
to “-”.
Remote
Control
Press
to set genset in remote control mode.
In “System Set” mode, press
to increase the data value,
equal to “+”.
Start
In ““Manual” Mode, press
can start genset.
Parameters Set Press
to enter “Parameters Set” selection menu.
Note
：
1 when the generator is stopped and in “Manual” Mode, press
and
for 5 seconds at
the same time, it displays password “Test” mode
. If user doesn’t input the right
password in 60 seconds, the system will automatically exit password menu and enters System
Operation menu.
2 In “Parameters Set” menu, press
,
and
for 5 seconds in the same time to
backup current system set, and the digital tube displays “Backup” for 2 seconds.
3 When genset is stopped, and in “Manual” Mode, press
,
and
for 5secs to
restore system set, and the digital tube displays “Reset” for 2 seconds.
4 In the “Oil Filter Running Time” mode, press
for 5 seconds, it will clear alarm of oil filter
