Kipor IG3000 Скачать руководство пользователя страница 16

9.TROUBLESHOOTING

NO 

YES 

When the engine will not start:

Is there fuel in the tank? 

Is the engine switch  on?

Refill the fuel tank.

Turn the engine switch on.

NO 

NO 

NO 

Is the fuel valve on?

YES 

YES 

YES 

Is the enough oil  in the engine?

Is there a spark from the 
spark plug?

Turn the fuel valve on.

Add the recommended oil.

NO 

Replace the 
spark plug.

Still no spark

Take the generator 
to   an  authorized
dealer.

 Be sure there is no spilled

     fuel around the spark plug.

     Spilled fuel may ignite.

Is  the  fuel  reaching  the 
carburetor?

If  the  engine  still   does  not
start, take the generator to an
authorized  dealer.
 

To check:

1) Remove the spark plug cap and clean

any dirt from around the spark plug.

2) Remove the spark plug and install the 

spark plug in the plug cap.

3) Set  the  plug  side  electrode  on  the 

cylinder head to ground.

4) Crank the engine, sparks should jump 

across the gap.

To check:

1) Turn off the fuel valve and lossen the 

drain screw.

2) Fuel should flow from the drain when 

the fuel valve is turned on.

WARNING

-23-

-22-

Is the overload
indicator light ON?

Appliance does not operate:

Is the output indicator light ON?

Take  the generator  to  an

authorized dealer.

Check the electrical appli-

ance or equipment for any 

defects.

Take  the generator  to  an

authorized dealer.

 Replace   the  electrical

appliance or equipment

 Take the electrical appli-

ance  or  equipment  to  an 

electrical shop for repair

YES 

NO 

NO 

NO 

YES 

YES 

NO 

YES 

Is DC circuit protector on?

No electricity at the DC receptacle:

Turn the DC circuit protector on.

Take the generator to an

authorized dealer.

Содержание IG3000



















Отзывы: