Kioti KL2042, Руководство оператора, Страница: 28 / 40

25
6.2.2 Rear axle
This is a sealed single unit that does not require maintenance. It is permanently
lubricated and its lubricant does not need changing or topping up.
6.2.3 Battery
The battery must be carefully maintained to ensure long life. The machine battery
must always be charged:
– before using the machine for the first time after purchase;
– before leaving the machine disused for a long period;
– before starting up the machine after a long period of disuse.
Carefully read and observe the battery recharging instructions in the booklet
provided with the battery. Failure in following the instructions or in charging the
battery could permanently damage the battery cells.
A flat battery
must
be recharged as soon as possible.
IMPORTANT
Recharging must be done using a battery charger at
constant voltage. Other recharging systems can irreversibly damage the
battery.
The machine comes with a connector (1) for recharging; this is connected to the
corresponding connector for the special “CB01” or "FIGHTER" maintenance
battery-charger supplied (
if included)
or available on request ( 9.2).
IMPORTANT
This connector must only be used for connection to the
“CB01” or “FIGHTER” maintenance battery-charger. For its use:
– follow the instructions in the relevant user manual,
– follow the instructions in the battery manual.
6.2.3.1 Battery Charger
NOTE
The battery charger kit is not supplied as standard on all models.
1 1
6. MAINTENANCE (cont.)