Kioti KL2042, Руководство оператора, Страница: 18 / 40

15
b)
The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in “neutral”;
– the operator leaves his seat with the transmission in “neutral” but without apply-
ing the parking brake;
– the parking brake is engaged without disengaging the blades.
– the speed change is activated ( 4.22) or the drive pedal
( 4.32) with the parking brake on.
5.3 DIRECTIONS BEFORE STARTING WORK
Before starting to mow, it is necessary to carry
out several checks and operations to ensure you
can work efficiently and in maximum safety.
5.3.1 Seat adjustment
To change the seat position, loosen the four
fixing bolts (1) and slide it along the slots.
Once you have found the right position, tighten
the four screws (1).
5.3.2 Tyre pressure
1
1
Having the right tyre pressure is the main condition for ensuring that the cutting
deck is horizontal and mows evenly.
Unscrew the valve caps and connect a compressed air line with a gauge to the
valves and adjust the pressure to the indicated values.
5.3.3 Filling with oil and fuel
NOTE
The engine manual
indicates what type of oil and fuel you
can use.
With the engine off, check the oil level.
According to the instructions in the engin
manual, this must be between the MIN an
MAX marks on the dipstick.
17.4 psi / 1,2 bar
(15 inch Ø)
(13 inch Ø)
14.5 psi / 1,0 bar
21.7 psi / 1,5 bar
MAX
MIN
5. HOW TO USE THE MACHINE (cont)