Kioti DK90, Руководство пользователя

Страница: 68 / 140

5
-3 OPERATION
OPERATING NEW TRACTOR
CHANGING LUBRICATING OIL
FOR NEW TRACTORS
How a new tractor is handled and main-
tained determines the life of the tractor.
Care should be taken to operate the
tractor for the first 50 hours at a slower
speed and avoid excessive work or
operation until the various parts be-
come "broken-in." The manner in which
the tractor is handled during the "break-
ing-in" period greatly affects the life of
your tractor. Therefore, to obtain the
maximum performance and the long-
est life of the tractor, it is very impor-
tant to properly break-in your tractor.
In handling a new tractor, the following
precautions should be observed.
You should not operate your tractor
at full speed for the first fifty hours
of use.
Avoid sudden starts and stops.
In cold climates, allow your tractor
plenty of time to warm up.
Do not run the engine at speeds
faster than necessary.
Use due caution when operating your
tractor on rough roads or terrain.
The above precautions are not limited
to new tractors only, but are a good
practice for tractors regardless of their
age.
Special attention should be given to
new tractors lubrication oil. New parts
are not accustomed to each other and
are not broken in properly. Small metal
grit can develop in the lubricating sys-
tem as metal parts begin to "break-in"
and continuous use of the contaminated
oil can cause damage and failure.
Therefore you should change the
tractor's oil after the break-in period.
For further details of the oil change and
service schedule, see "maintenance"
section.